High Quality Best Metal Housing Curing Light Pen-Type, Recommended Metal Housing Curing Light Pen-Type, Recommended Metal Housing Pen-Type Curing Light Suppliers in China

Home > Products > Fiber Optic Adaptor > Metal Housing Curing Light Pen-Type

Metal Housing Curing Light Pen-Type

Metal Housing Curing Light Pen-Type

    Packaging: By paper box
    Productivity: 300 units / month
    Brand: ELiTEDENT
    Transportation: Ocean,Air,Express
    Place of Origin: Taiwan
    Supply Ability: 300 units / month
    HS Code: 9018
    Port: Port of Keelung

Basic Info

Model No.: Q-6

Product Description

The ELiTEDENT Q-6 is a fast-curing LED Curing Light. It emits typical light energy output at about 1,200 - 1,400 mW/cm². 5 seconds to cure most composite in the market with 2mm thickness. It also features:

Multiple mode selection: boost (fast curing) and ramp up,

All aluminum handpiece housing for improved durability. No more plastic to stain or crack.

Two button easy operation.

Quiet operation, fan-free design.

Can be used both cordless and corded.

Low battery warning; for urgent use, just insert power cord Connector into Handpiece directly.

Rechargeable lithium battery inside, capable of 200 x 10 sec curing cycles prior to recharging.

Slim handpiece for most comfortable hand holding, (weight 1g only).

8mm diameter sterilizable curing tip.

Curing tip rotates 360for curing at any position of mouth.

► Versatile Fiber Optic curing tip optional.

The ELiTEDENT Q-6 Curing Light is a pen style, cordless, high-performance LED light source Curing Light intended for polymerization of resin-based light cured dental materials by dental professionals.

ELiTEDENT Q-6 Curing Light incorporates 5W blue LED to achieve high light energy output with wavelength range of 440 to 480 nm to polymerize virtually resin-based composite in the market and a high power mode to produce super-fast curing effect. The relevant range is for camphorquinone (CQ) containing product.

Though the majority of light-curing dental materials are responsive in this range of wavelengths, it is suggested you should contact the filling material maker to make sure it before use.

1. The Curing Light is intended to be used only as specifically outlined in these Directions for Use. Any use of the Curing Light inconsistent with the Directions for Use is at the discretion and is the sole responsibility of the practitioner.

2. Keep solvents, flammable liquids, and sources of intense heat away from the Curing Light as they may damage the plastic housing of the charger, the seals, or the cover on the operating buttons.

3. To protect the light guide, after each curing procedure is completed, the handpiece should always be placed back into its holder.

4. To obtain a safety operation, we suggest that check your local AC power supply voltage before you buy and use this product from oversea.

5. The adaptor is served to disconnect the device, not to position the equipment to make it difficult to operate the disconnection device.

6. Check unit for adequate light output before each procedure. Failure to verify output may allow inadequate curing.

7. On the applied part, light guide, the temperature may up to 43/110 at the atmosphere temperature of 40/104

8. In order to avoid electric shock do not introduce any objects into the unit with the exception of replacement parts handled in accordance with the Operating Instructions. Do not attempt to change the Curing LED, open or alter the unit in any way

9. Use only genuine Rolence parts when replacing defective components as directed in these Operating Instructions. The Curing Light’s warranty does not cover any damage resulting from the use of third-party replacement parts.

10. A warning that other cables and accessories may negatively affect EMC performance.

11. A warning regarding stacking and location close to other equipment.

12. A warning that use of other accessories results in non-compliance.

Rolence Enterprise Inc.

  • 1
  • 2
  • 3
  • 4

Rolence Enterprise Inc. headquartered in Taiwan, develops, manufacturing & innovation on small equipment of Ultrasonic Scaler, Portable X-Ray, Dental Digital Sensor and LED Curing Light...etc. For over 40 years, we are an international supplier of dental equipment for various companies .

Multi-innovative developments & processes, proven know-how and high-quality have given us a leading position to our customer. and keep up with the innovative and creative design concepts into our products chain by incorporating the dentists` and other technology industry needs.

Besides, with further office locations will be in Germany, we will keep expending our office establish in different country afterward, and supporting our customer latest information, product training, and marking media to increase your business, that`s why we are approaching you to present ourselves & the products to reach a good cooperation in the future.

Company Info

  • Company Name: Rolence Enterprise Inc.
  • Representative: Sterling Cheng
  • Product/Service: Portable X-Ray , Curing Light , Ultrasonic Scaler , Curing Box , Dental Digital Sensor , UV Spot Curing
  • Capital (Million US $): TWD$65,400,000
  • Year Established: 1981
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: Fewer than 5 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: No. 18-3 , Lane 231, Pu Chung Rd., Chungli Dist., Taoyuan City, Taiwan R.O.C. 32083
  • Contact Person: Mr. Peter Chiu
  • Tel: +886-3-4631999
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters